Edimaxext Setup

by

Are you struggling to set up your Edimax Router or Edimax Wifi Extender? Don’t worry, we’ve got you covered! In this comprehensive setup guide, we will walk you through the step-by-step process to get your devices up and running in no time. So grab a cup of coffee and let’s dive in!

Edimax.Setup: Steps to Edimax Router Setup

Setting up your Edimax router is a breeze. Just follow these simple steps:

  • Plug the adapter pin into a 12V DC power point at the back of your router and connect the other end to an electrical socket.
  • Wait until the power LED on the router turns stable.
  • On your Wi-Fi device, such as a tablet, computer, or smartphone, look for ‘edimax.setup 5G’ or ‘edimax.setup’ in the Wi-Fi network list. Connect to this network.
  • If you can’t find the network, simply reset your device.

Once connected to “Edimax.setup,” open your web browser and type http://edimax.setup/ in the URL bar. If that doesn’t work, try typing 192.168.2.1. Enter “admin” for the username and “1234” for the password. If the browser doesn’t accept this information, check the back of your router for the default username and password.

Now, you’ll be prompted to choose between using the router in Wi-Fi router mode or access point mode. Follow the on-screen instructions to complete the setup, and choose whether to use the IQ Setup Wizard or manually enter the settings. Once done, connect the blue internet port of the router to the modem’s LAN port using an Ethernet cable and click on ‘Next.’ Check the summary of the configuration and click on ‘Next’ to proceed.

Congratulations! Your Edimax router is now set up and ready to use.

Edimaxext.Setup: Steps for the Edimax Extender Setup

Setting up your Edimax extender is just as simple. Here’s what you need to do:

  • Plug the extender into a power socket near your Wi-Fi router and wait for the power LED to turn stable.
  • Now, there are two ways to set up the extender:
    a. Setting the Device as the Extender through WPS:

    • Turn on the router’s WPS function by pressing and holding the WPS button for 2 seconds.
    • Hold the WPS button on the extender for 2 seconds or until the Power LED starts flashing slowly.
    • Check the extender’s Wi-Fi LED to ensure a signal. If the LED is off, move the extender closer to the router.
    • A solid Wi-Fi light on the extender confirms a successful setup.
      b. Setting the Device as the Extender Using IQ Setup (Browser):
    • Connect a Wi-Fi capable device (phone or laptop) to the Edimax Extender Network Name (EdimaxEXT.Setup_XX) and enter the password.
    • Open your web browser and enter http://edimaxext.setup or try the default IP address 192.168.2.2. Enter “admin” for the username and “1234” for the password.
    • Choose the mode in which you want to set up the extender (Wi-Fi router mode, bridge mode, or extender mode) and follow the instructions on the screen.
    • Check the extender’s Wi-Fi LED for a signal. If the LED is off, move closer to the extender or reset it.

Great job! Your Edimax extender is now set up and ready to provide extended coverage in your home, eliminating any dead zones.

Where Should I Place the Edimax Extender After Setup?

To get the best coverage, make sure you relocate the extender to a place where the signal strength shows ‘Good Performance.’ This is typically an open space, between the Wi-Fi dead zone and the router, with minimal overlap between the extender and the router’s signal coverage. Factors like wall thickness and interference from other devices can affect the Wi-Fi’s performance.

And that’s it! With these easy-to-follow steps, you can set up your Edimax router and extender in just a few minutes. Say goodbye to Wi-Fi dead zones and enjoy seamless connectivity throughout your home.

FAQ

  • What if I don’t remember my login password for web management in the Edimax Router?
    If you’ve forgotten your login password, simply reset the router to its factory default settings by holding the WPS or Reset button for 12 seconds. After the router restarts, the default username and password will be “admin” and “1234” respectively.

  • What will happen when I connect the wired Ethernet client in the Range Extender mode when the router is set up as the dual-band extender?
    If you connect a network device in the range extender mode to the router using an Ethernet cable, it will connect to the 5GHz network by default. If no 5GHz network is available, it will connect to the 2.4GHz network.

  • How can I upgrade the firmware in the router?
    To upgrade the firmware in your Edimax router, follow these steps:

    1. Connect your computer to the router’s LAN port using an Ethernet cable.
    2. Open your web browser and enter 192.168.2.1 or edimax.setup in the address bar.
    3. Enter “admin” for the username and “1234” for the password.
    4. Click on “Administration” and then “Upgrade.” Browse for the firmware file, click “Apply,” and wait for the upgrade to complete.
    5. Once the upgrade is done, you can access the internet. If you face any issues, try unplugging and restarting the router.

  • What to do if the wireless extender turns extremely hot?
    It is normal for the Edimax extender to heat up during frequent use. However, if you notice a burning smell or see smoke coming from the extender, unplug it immediately and contact your dealer for assistance.

  • What is the best place to place the wireless extender?
    The best location for your Edimax extender is in an open space, ideally between the Wi-Fi dead zone and the router. Make sure the extender LED displays ‘Excellent’ signal strength. Keep in mind that proximity, wall thickness, and other devices can affect Wi-Fi performance.

Edimax.Setup via Its IP Address 192.168.2.1 (For Edimax Routers)

If the “Edimax.Setup” web URL doesn’t take you to the Edimax router setup page, try using the IP address 192.168.2.1. Here’s how:

  • Plug the router into an electrical outlet.
  • Connect the internet cable to the WAN port of the router.
  • Grab a computer, laptop, or cell phone.
  • Go to the Wi-Fi list on your device and look for “Edimax-Setup-XXX.” Connect to it.
  • Open a browser and type 192.168.2.1 in the URL bar. Follow the on-screen instructions to complete the setup.
  • If 192.168.2.1 doesn’t work for you, try resetting the router or using a different device.

Edimaxext.Setup via Its IP Address 192.168.2.2 (For Edimax Extenders)

If the “Edimaxext.setup” URL doesn’t work, you can also set up the Edimax extender using its default IP address. Here’s how:

  • Power up the extender by plugging it into a wall outlet near your router. It is compatible with Edimax routers and other brands.
  • Wait for the power LED to stabilize.
  • On your laptop or computer, go to the Wi-Fi settings and connect to the “Edimaxext-setup-XXX” network name (the extender’s default network name).
  • Open a browser and enter 192.168.2.2 in the URL bar. Follow the on-screen instructions to complete the setup.
  • If 192.168.2.2 doesn’t work, try resetting the extender or moving it closer to the router.

With these alternative IP addresses, you can easily set up your Edimax router and extender, ensuring a seamless internet experience.

That’s it! Now you have all the information you need to set up your Edimax Router and Extender. Say goodbye to Wi-Fi dead zones and enjoy uninterrupted connectivity throughout your home. Happy browsing!