Belong Modem Login

Belong Modem Login

by

Are you looking to change some settings in your Belong modem? Whether you want to update your Wi-Fi password, optimize your connection, or monitor the devices connected to your network, accessing your modem’s configuration page is the first step. In this guide, we’ll walk you through the process of accessing your Belong modem’s settings and provide some common settings you may need to update.

Accessing Your Belong Modem

To access your modem’s configuration page, follow these simple steps:

  1. Log on to your Belong Wi-Fi. Remember, you don’t need to be connected to the internet to do this.

  2. Open an internet browser like Internet Explorer, Safari, or Chrome.

  3. In the address bar, type 10.0.0.138.

  4. If prompted, enter the modem username and password. Use ‘admin’ for the username and ‘Belong’ for the password.

Once you’re logged in, you’ll have access to your modem’s settings and configuration options. Now let’s take a look at some common settings you may need to update.

How to Connect to Wi-Fi

Belong DWA0122 modem

DWA0122 Modem Support

To connect to Wi-Fi using the DWA0122 modem, follow these steps:

  1. On your device, find and select your modem’s Wi-Fi network name (SSID).

  2. When prompted, enter the ‘Network Key’ (Wi-Fi password) as shown on the Wi-Fi card or sticker. Remember, passwords are case sensitive.

Belong 4353 modem

Belong 4353 Modem Support

To connect to Wi-Fi using the Belong 4353 modem, follow these steps:

  1. On your device, find your modem’s Wi-Fi network name (SSID) on either 2.4GHz or 5GHz, then select the Wi-Fi network you wish to connect to. Note that the 5GHz network is only visible to compatible devices.

  2. When prompted, enter the ‘Network Key’ (Wi-Fi password) exactly as shown on the Wi-Fi password card or sticker. Again, passwords are case sensitive.

Sagemcom 4315 modem

Belong 4315 Modem Support

To connect to Wi-Fi using the Sagemcom 4315 modem, follow these steps:

  1. On your device, find and select your modem’s Wi-Fi network name (SSID).

  2. When prompted, enter the ‘Network Key’ (Wi-Fi password) exactly as shown on the Wi-Fi card or sticker. Remember, passwords are case sensitive.

Now that you’re connected to your Wi-Fi network, let’s explore some other settings you may need to update.

Updating Your Wi-Fi Settings

Changing Your Wi-Fi Password, Network Name, and Password

If you need to change your Wi-Fi password (network key) or update your network name and password, follow the instructions below:

Check out our guide on How to Change Your Wi-Fi Name and Password for detailed steps and instructions.

Improving Your Wi-Fi Connection

Belong DWA0122 modem

To improve your Wi-Fi connection using the DWA0122 modem, follow these steps:

  1. Make sure you’re connected via Wi-Fi or Ethernet.

  2. Open an internet browser and type 10.0.0.138 into the address bar.

  3. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Sign in’.

  4. Select the ‘Advanced’ menu option in the top right-hand corner of your screen.

  5. Click on ‘Wi-Fi’ in the Advanced View.

  6. Under ‘Access Points 2.4GHz settings’, select ‘Wi-Fi Name/SSID’ and note the current channel.

  7. Under ‘Access Points 5GHz network’, select the ‘Wi-Fi Name/SSID’ (not the current channel).

  8. Select the ‘Wireless Data Analyser 2.4GHz’ to view all neighboring 2.4GHz networks and click ‘Accept’ when prompted.

  9. Select the ‘Wireless Data Analyser 5GHz’ to view all neighboring 5GHz networks and click ‘Accept’ when prompted.

  10. Under ‘Access Points 2.4GHz settings’, select ‘Wi-Fi Name/SSID’ and change the Channel field to one of the least overlapped channels from Step 6.

  11. Under ‘Access Points 5GHz settings’, select ‘Wi-Fi Name/SSID’ and change the Channel field to one of the least overlapped channels from Step 7.

Once you’ve made these changes, your device will temporarily disconnect from the network and automatically reconnect using the new network configuration settings.

Belong 4353 modem

To improve your Wi-Fi connection using the Belong 4353 modem, follow these steps:

  1. Make sure you’re connected via Wi-Fi or Ethernet, and the ‘Sync’ light is a solid green color.

  2. Open an internet browser and type 10.0.0.138 into the address bar.

  3. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  4. From the top menu, select ‘Advanced’.

  5. Select the Wi-Fi network you want to optimize (2.4GHz or 5GHz).

  6. Select ‘Wireless Environment’ and then ‘Start Scan’ to identify any neighboring Wi-Fi networks causing interference.

  7. Identify the Wi-Fi channel with the least overlapping interference.

  8. Select ‘Basic’ and under ‘Channel Selection’, choose the channel with the least overlapping interference.

  9. Click the ‘Apply’ button to save your changes.

If there are no neighboring Wi-Fi networks, you may be able to improve your connection by selecting ‘Advanced’ and changing the ‘Bandwidth’ to 40MHz. However, if the quality of your connection worsens, revert back to 20MHz. Your device will temporarily disconnect from the network and automatically reconnect using the new network configuration settings.

Sagemcom 4315 modem

To improve your Wi-Fi connection using the Sagemcom 4315 modem, follow these steps:

  1. Make sure you’re connected via Wi-Fi or Ethernet, and the ‘DSL’ light is a solid green color.

  2. Open an internet browser and type 10.0.0.138 into the address bar.

  3. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  4. From the left-hand menu, select ‘Wireless’.

  5. Tick the checkbox next to ‘Disable WMM Advertise’ and ‘Enable Wireless Multicast Forwarding (WMF)’.

  6. Change the ‘Channel Selection’ to a different channel, keeping in mind that channel performance may vary based on nearby wireless interference.

  7. Click ‘Save/Apply’ to save your changes.

If there are no neighboring Wi-Fi networks, you may be able to improve your connection by changing the ‘Bandwidth’ to 40MHz. However, if the quality of your connection worsens, revert back to 20MHz. Your device will temporarily disconnect from the network and automatically reconnect using the new network configuration settings.

Changing Your Modem Login Security Details

Belong DWA0122 modem

By default, the admin login password for the DWA0122 modem is ‘Belong’. If you want to change the modem’s admin password, follow these steps:

  1. On your device, open an internet browser and type 10.0.0.138 into the address bar.

  2. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Sign in’.

  3. From the home screen, select ‘User Settings’.

  4. Enter your new password into the password field and click ‘Save’.

Once you’ve changed your password, you’ll need to sign in again using the new details. If you forget the admin password, you can factory reset the modem to restore the original default settings.

Belong 4353 modem

By default, the admin login password for the Belong 4353 modem is ‘Belong’. If you want to change your modem’s admin password, follow these steps:

  1. On your device, open an internet browser and type 10.0.0.138 into the address bar.

  2. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  3. From the main screen, select ‘User Settings’.

  4. Enter the old password (‘Belong’), then type your new password into the open fields.

  5. Click ‘Apply’.

Once you’ve changed your password, you’ll need to log in again using the new details. If you forget the admin password, you can factory reset the modem to restore the original default settings.

Sagemcom 4315 modem

By default, the admin login password for the Sagemcom 4315 modem is ‘Belong’. If you want to change the modem’s admin password, follow these steps:

  1. On your device, open an internet browser and type 10.0.0.138 into the address bar.

  2. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  3. From the left-hand menu, select ‘Management’, then ‘Access Control’.

  4. Enter the old password (‘Belong’), then type your new password into the open fields.

  5. Click ‘Save/Apply’.

Once you’ve changed the password, you’ll need to log in again using the new details. If you forget the admin password, you can factory reset the modem to restore the original default settings.

Monitoring Your Home Wi-Fi

If you want to keep an eye on who is connected to your home Wi-Fi network, you can follow these steps:

Belong DWA0122 modem

To see who is connected to your Wi-Fi using the DWA0122 modem, follow these steps:

  1. Make sure you’re connected via Wi-Fi or Ethernet.

  2. Open an internet browser and type 10.0.0.138 into the address bar.

  3. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  4. Next, select the ‘Advanced Menu’ option in the top right-hand corner of the dashboard.

  5. Click on ‘Devices’ to view the devices using your Wi-Fi.

  6. If you suspect unauthorized access, we recommend changing your password.

For more options on managing connected devices, select ‘Local Network’ from the left-hand menu, then ‘Devices’ to see the devices you can control.

Belong 4353 modem

To see who is connected to your Wi-Fi using the Belong 4353 modem, follow these steps:

  1. Make sure you’re connected via Wi-Fi or Ethernet, and the ‘Sync’ light is a solid green color.

  2. Open an internet browser and type 10.0.0.138 into the address bar.

  3. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  4. From the main screen, you’ll see a list of devices connected to your modem via Wi-Fi and Ethernet.

  5. If you see any devices you don’t recognize, we recommend changing your Wi-Fi password.

  6. You can also select a device and make changes to its network settings.

For more options related to managing connected devices, select ‘Advanced’ from the main menu, then choose a device to make changes to or select the Wi-Fi network for network options.

Sagemcom 4315 modem

To see who is connected to your Wi-Fi using the Sagemcom 4315 modem, follow these steps:

  1. Make sure you’re connected via Wi-Fi or Ethernet, and the ‘Sync’ light is a solid green color.

  2. Open an internet browser and type 10.0.0.138 into the address bar.

  3. When prompted for the modem authentication username and password, enter ‘admin’ for the username and ‘Belong’ for the password. Click ‘Login’.

  4. From the left-hand menu, select ‘Device Info’, then ‘DHCP’ to see the devices connected to your modem.

  5. If you see any devices you don’t recognize, we recommend changing your Wi-Fi password. You can do this by selecting ‘Wireless’, then ‘Security’ from the left-hand menu.

By following these steps, you’ll be able to access and customize your Belong modem settings, ensuring a seamless and secure Wi-Fi experience. Remember, if you ever forget your admin password, you can always factory reset your modem to restore the default settings. Enjoy your enhanced connectivity!