Are you looking for a seamless way to connect PhotoSync with your FRITZ!Box? Look no further! In this article, we will guide you through the process, ensuring a smooth and secure connection. Whether you have an old Fritzbox or the latest version, we’ve got you covered. So, let’s get started!
Setting Up the FRITZ!Box
Before you can start connecting PhotoSync to your FRITZ!Box, there are a few preparations you need to make in the FRITZ!Box administration. Don’t worry, it’s easier than it sounds!
-
Permit SMB Access: Head over to the FRITZ!Box Administration and navigate to Home Network > USB / Storage. Make sure to activate the “Access via a network drive (SMB)” option. If you want to enable an FTP connection, activate the “Access via FTP” option as well.
-
Activate Storage Function: If you have a USB data carrier connected to the FRITZ!Box, activate the “Storage (NAS) function of FRITZ!” option and check the box next to the connected USB drive.
-
Create a User Account: It’s essential to create at least one user account for NAS functionality. You can either use the default account “fritzxxxx” with your FRITZ!Box administration password or create a new account. Make sure to configure the settings for the NAS functionality of the FRITZ!Box for your account.
-
Grant Access to NAS Content: Enable the “Access to NAS content” setting for the desired FRITZ!Box user account. This will allow you to access the NAS storage of the FRITZ!Box. Double-check that you have read and write access to all available storage on the FRITZ!Box. If you want to restrict access to specific directories on your connected USB storage device, you can set up individual directories via “Add directory.”
-
Note the IP Address: To establish a connection to your FRITZ!Box, you will need the name (usually FRITZ.NAS) or the IP address (network address) of your FRITZ!Box. You can find this information in the FRITZ!Box administration under Home Network > USB / Storage > Home Network Sharing.
Connecting PhotoSync to Your Fritz!Box
Now that you have set up your FRITZ!Box, it’s time to connect PhotoSync. Follow these simple steps:
- Open PhotoSync settings and go to “Configure > SMB.”
- Add a New Configuration: Click on “Add Configuration” to create a new connection.
- Use the following settings:
- Host: Enter the name or IP address of your FRITZ!Box.
- Username: Use your FRITZ!Box user account or the default account “fritzxxxx.”
- Password: Enter the password associated with your user account.
- Share: Leave this field empty unless you want to specify a particular directory.
And that’s it! You have successfully connected PhotoSync to your FRITZ!Box. Now you can transfer your precious photos and media effortlessly. Enjoy the convenience of seamless synchronization between your devices.
Remember, by following these steps, you ensure the security and speed of your connection. Say goodbye to insecure and slow SMBv1 protocols and embrace the power of PhotoSync and your FRITZ!Box.
So, what are you waiting for? Start syncing your photos with ease and enjoy the convenience of PhotoSync and FRITZ!Box. Happy syncing!
*Note: The images used in this article are for illustrative purposes only.